ROOFTOPCOAT

THE SOLUTION TO COOL ROOFS

Special paints for ROOFS

APPLICATIONS is a high-quality, heat reflective and weatherproof roof coating for use on different materials.
– bitumen roofing with slate
– roof tiles without glaze
– eterniet plates

PRODUCT PROPERTIES Based on mineral resources
Dust free after 30 minutes – paintable after about 2 hours
Available in white and color on request
Mat
EFFICIENCY 1 KG for 7 m2 (one layer)
SHELF LIFE In closed packaging in a cool and dry place – unmade
Packaging units Various packaging units. Ranging from 1 KG and 4 KG bags rooftopcoat.
Easily stackable and transportable in various sizes of shipping boxes

Paint according to advice and/or standard processing requirements

Why ROOFTOPCOAT?

  • BESTENDIG TEGEN WATERPLASSEN OP HET DAK
    Often puddles of water remain on a flat roof. In regular paint, puddles can cause condensation due to the fliter that the paint places on the bitumen, releasing paint; ROOFTOPCOAT pulls into the bitumen and therefore cannot cause condensation.
  • LOWERING SURFACE TEMPERATURE
    A white roof heats up less than a black roof. The maximum temperature of a black roof fluctuates around 70 degrees C, while a white roof does not become warmer than 40 degrees C.
  • UV RESISTANCE
    A white roof reflects sunlight, keeping the roof cooler.
  • Air conditioning
    The amount of solar heat transported to the building is lower with a white roof, which also reduces the energy consumption to cool a building. The interior temperature of a building with a white roof can be 6-10 degrees C compared to a black roof.
  • ROOF LIFE
    By removing large temperature fluctuations from hot to cold, you extend the life of the roof.

Benefits ROOFTOPCOAT

  • REDUCE ENERGY COSTS
    Air conditioners that suck air on the roof should work less a white roof to cool the sucked air. To give an idea: an air conditioning uses 3 times as much energy as heating. So you can save a lot of energy with this.
  • HIGHER EFFICIENCY SOLAR PANELS
    Solar panels and a white roof go well together. A white roof reflects the sunlight, which significantly increases the efficiency of the solar panels.

Warranty Provision ROOFTOPCOAT


Test report by COT Haarlem

Use the following rooftopcoat creation scheme

Instructions
Add water to ROOFTOPCOAT in a bucket and mix mechanically (with
drilling) into a smooth mixture

Ratio
1 KG ROOFTOPCOAT : 500 ml -600 ml WATER

PROCESSING TIME
Since it is a fresh product, created paint must be made within 1.5 hours
applied

Processing
Block brush and roller

PROCESSING TEMPERATURE
Not below 5C and above 25C

Pre treatment

  • Pre-spraying and dust-freeing
  • After spraying, allow roof to dry out before application!
  • Apply to dry surfaces
  • Do not use primer for adhesion

Use a roller to apply the paint.

For spraying ROOFTOPCOAT, please seek advice in advance.

  • a bucket
  • a mixer (i.c.m. drill)
  • a roller

After six months out of a bucket of water, a test piece is hosed:

INFORMATION request ROOFTOPCOAT SPECIAL PAINT

7 + 7 =